15km 30km 80km 150km long-distance wireless video transmitter receiver transmission transceiver

AES 128 Video Encryption
Strong encryption algorithms ensure the security and privacy of video transmission.

Longer Distance
With 2 Watts, 5 Watts, 10 Watts Power Amplifier, supports 15KM, 22KM, 30KM, 55KM, 80KM 100KM, 150KM transmission distance

Frequency Switchable
The transmission frequency is switchable from 800Mhz, 1.4Ghz, and 2.4Ghz at the Web Management UI. Details

Signal Strength
The receiver screen can show the signal strength of the transmitter, users can move better reception place.

Video + Data + Control
Except for video, it also supports the two-way transfer of data and controls commands via the UART between the transmitter and the receiver.

Lower Latency
From the receiver's computer screen snap, we can see the current transmission latency /delay is 28-76ms (millisecond). details

LOS and NLOS
Support LOS (Line-Of-Sight) 30km up to 150km and NLOS (Non-Line-Of-Sight) Test video: 27km 110km NLOS

Bandwidth Presettable
The transmission bandwidth can be presentable at 3M, 5M, 10M, and 20 M. Details 10-15-20Mbps

Two Antenna on the TX RX Transceiver
ANT1 for transceiver mode, ANT2 for receiving mode

Full set in the package
The package is including a transmitter, receiver, both side antennae and accessories cable. Picture

 

long-distance wireless video transmitter receiver

1. Based on OFDM technology, a Web camera (HD camera with ethernet) is recommended.
2. Two-way broadband wireless link equipment (Receiver can get the audio-video download, it also can upload the data to the receiver)
3. Interface: 2X Ethernet ports, 3X RS232 serial ports, audio input-output (More control operation) If your camera is HDMI output, then it needs an extra encoder device, which can encode the HDMI video and audio signal to digital data to this transmitter. At the receiver, it can connect your computer or NVR directly, if you need the output to an HDMI monitor, then it also needs an extra decoder device to encode the digital data to HDMI video and audio signal.
4. Default Data Interface is RS232, We also can modify it to TTL, Sbus, or RS485, please contact us if you need to know how to connect it to your flight controller, for example, Pixhawk 4.
5. Dual antennas: SMA connectorANT1 main antenna works in transceiver mode, ANT2 auxiliary antenna works in receive mode.
6. Wireless working frequency band: 1427.9~1447.9MHz (1.4G) or 806~826MHz (800Mhz), or optional 2401.5~2481.5MHz (2.4G) support automatic frequency hopping in the frequency band (default working frequency is 1.4G)
7. Wireless bandwidth: 3MHz, 5MHz, 10MHz, 20MHz, all nodes share the working bandwidth, and the maximum sharing rate of the system is 30Mbps.
8. Modulation mode: QPSK/QAM16/QAM64 automatic adaptation.
9. Networking mode: point-to-point, point-to-multipoint star network. (For example, 6 cameras and a transmitter to one receiver.)
10. Wireless transmitting power: 10W.
11. The node receiving sensitivity: -103 at 10MHz bandwidth.
12. Support AES128 encryption and decryption.
13. Transmission distance: 15km/30km/80km/150km optional.
14. The device configuration and wireless working status can be viewed through the Web UI of the network port or the serial port.
15. 2W PA: DC12~16V, 33dBm, the average power consumption of the video transmitter is less than 12W, and the average power consumption of the video receiver is less than 10W. (Yellow power connector is XT30PW / XT60PW) (Without Any external PA, the module has 300mW, 25dBm)
    5W PA: DC24~25V, 37dBm, the average power consumption of the video transmitter is less than 22W, and the average power consumption of the video receiver is less than 16W.
    10W PA: DC24~30V, 40-41dBm, 28V power supply is recommended, the maximum average power consumption is less than 1.4A@28V, and the instantaneous peak power supply requirement can reach 2.8A@28V.
16. Size: 124*67.8*28.5mm (excluding the connector extending out of the shell, etc.).
17. Weight: 0.3W 133 grams, 2W 142 grams, 5W 142grams, 10W 242.5 grams

long-distance wireless video transmitter receiver

Input Output

long-distance wireless video transmitter receiver size

Transmitting Method

Point to Point, Point to Multi-Point, One air unit + two ground units, Point to Multi-Point Relay model, IP mesh radio,

long-distance wireless video transmitter receiver relay forwarding point to multi-points
OFDM wireless video transmitter and receiver IP mesh for camera

see Web UI configuration details

UI Wireless 1.4G long-distance wireless video transmitter receiver

2W 27km Test transmitter and receiver map

27km-long-distance wireless video transmitter receiver